I-Epoxy AB I-Adhesive yetshe
Ukupakisha Ukucaciswa
| Uhlobo | Ukucaciswa |
| PM uhlobo lokumisa kancane | 1L, 5L, 10L |
| Uhlobo lokumisa ngokushesha lwe-PF | 10L |
Isibonisi somkhiqizo
Ububanzi bohlelo lokusebenza
1. Isetshenziselwa kakhulu uhlobo lwe-glue elengayo yetshe, udonga oludala ngaphandle kokusika nokuphakamisa ubuso, ukunamathela unomphela kwefenisha ye-lignum.
2. Ivamise ukufanela amatshe, insimbi, i-aluminium, insimbi engagqwali,ukhonkolo, iyunithi ye-precast kasimende, i-clay brisk, i-brisk yokwenziwa ku-alternation stick-up.
Izindaba Ezidinga Ukunakwa Kokusetshenziswa
1. Kudingekile ukuqinisekisa ukuthi indawo yokunamathisela yemitha yesikwele ngayinye ye-slate ayikho ngaphansi kuka-104cm2, futhi ubukhulu beglue bungaphezu kuka-3 mm;
2. Indawo enamathelayo kufanele yome, ingabi nothuli, ingabi namafutha, iqine futhi ingaxege.
3. Uma indawo yokunamathela ibushelelezi kakhulu, kufanele ibe rough, futhi indawo yokunamathela inezinto ezithinta umphumela wokubopha;njengothuli, ukungcola, amanzi, upende endaweni yensimbi, ungqimba olugqwalile, njll. Kufanele zisuswe.Ukomisa esigabeni sokuqala sokwelapha, iglue ayikwazi ukuthwala umthwalo osindayo.
4. Ukuze kwakhiwe izinga lokushisa eliphansi elingaphansi kwe-10 ° C ebusika, yonke iglue epoxy eyomisa ngokushesha kufanele isetshenziswe.Futhi isikhathi esisebenzayo sokwakha singanwetshwa sibe yimizuzu emi-5.
5. Uma izinga lokushisa lokwakha lingaphansi kuka-5 ° C, lingashiswa engxenyeni enamathiselwe, kodwa hhayi ngaphezu kuka-65 ° C.
6. Uma ukushisela nokufakwa kuyadingeka ngesikhathi sokwakhiwa, i-solder joint kufanele ibe ngaphezu kuka-3 cm kude nendawo yokunamathela yeglue.
7. Uma izinto zamatshe zikhululekile noma kunezimfantu eziningi, ungqimba lweglue eliqinile lokulungisa amatshe kufanele lisetshenziswe ngemuva kwetshe ukuze kuthuthukiswe ukuqina nokungangeni kwamanzi.
